Servomex has the revolutionary gas analysis solution you need for real-time safety monitoring in combustion applications. Our SERVOTOUGH Laser 3 Plus Combustion analyzer can be configured to measure both carbon monoxide (CO) and methane (CH4) with a single device, providing the detailed data and analysis required for boiler condition monitoring.
Monitoring CO levels is a key factor in optimizing combustion efficiency. In addition, a fuel-rich environment contains high levels of both CO and CH4. This is a constant risk and potential source of explosion, so has moved CH4 analysis from a largely ignored measurement to make carbon monoxide and methane analysis an essential safety monitoring requirement.
Low-NOx burners are highly effective at reducing unwanted emissions, but run a cooler, larger, more complex flame that is less stable than older burners. This flame instability has led to the need to improve flame-out detection. Changes to the ambient conditions, fuel composition, or pressure regulation can snuff out the flame or alter its profile to become heavily fuel-rich. A carbon monoxide and methane analyzer, measuring across the process, will detect any pockets of methane before it can flood through the process, allowing immediate corrective action.
Unlike point-measurement techniques, cross-stack Tunable Diode Laser (TDL) gas analyzers take an average measurement across the process. This allows a carbon monoxide and methane analyzer using this sensing technology to pick up any flame-out situation quickly. TDL is highly specific to the compound being measured and, as a light-based measurement with no sample extraction, provides a very fast response to changes in the boiler condition – usually within a few seconds.
Servomex’s SERVOTOUGH Laser 3 Plus Combustion analyzer can be optimized for the fast, accurate, and responsive measurement of CO+CH4. Using non-contact TDL sensing technology, it provides fast-response carbon monoxide and methane gas analysis, giving operators more time to take corrective action if boiler conditions change.
Containing all the benefits of Servomex’s TDL technology, in a light, compact unit, with unmatched installation flexibility plus cost and performance benefits, the SERVOTOUGH Laser 3 Plus Combustion is ready for accurate, fast-response measurements in combustion and process control, making it a must for safety applications.
Tunable Diode Laser (TDL) technology offers a fast-response, accurate measurement that is highly specific to the gas of interest. This non-contact, non-depleting sensing is used in our innovative, compact SERVOTOUGH Laser 3 Plus range of analyzers.
For more in-depth information about our carbon monoxide and methane analysis solutions, download our additional expert resources
ES 杂志第 37 期清洁空气第 2 部分
ES 杂志第 29 期清洁空气
Discover how our expert knowledge supports carbon monoxide and methane measurements for your application
A choice of technologies to fit your application
Extensive solutions for a range of carbon capture processes
Servomex is the global leader in gas analysis, providing solutions for cleaner, more efficient industries, and enabling the manufacture of products that benefit everyone. With 70 years of expertise and research behind us, we deliver industry-changing gas analysis measurements for process control, quality, safety, emissions monitoring, and combustion efficiency.
Wherever you are in the world, our network of service engineers provides the expertise you need to keep your ammonia analyzer operating at peak performance. With state-of-the-art service centers around the globe, you’ll always have the support your process needs.
Our global service network delivers the support you need to keep your analyzer or system operating at peak performance, for total peace of mind.
Our Purity & Specialty (P&S) team provides products, knowledge and service to market sectors including industrial and medical gases, UHP gases, and semiconductor manufacture
Our Industrial Process & Emissions (IP&E) division is responsible for our gas analysis solutions in the power generation, hydrocarbon processing and emissions monitoring markets
The Servomex difference is clear from the start, all the way through to delivery of a carbon monoxide and methane gas analysis system that will transform your process.
Our team stays in place throughout the project, ensuring consistent communication. This starts with identifying the parameters that the system must meet to ensure optimum performance and ease of use.
Our schematics and documents are reviewed by the customer until the final design is agreed upon. Our skilled engineers then assemble the system at one of our cutting-edge regional centers, with continuous evaluation throughout the build process.
After internal testing and an intensive Factory Acceptance Test (FAT), the finished system is shipped for installation. Our expert support team can commission and calibrate the system and provide any necessary operator training.