DF-550E an ultra-trace Coulometric oxygen analyzer.

Coulometric - Our Coulometric sensors provide high-sensitivity measurements of oxygen

Used to measure oxygen (O2), Coulometric sensing is based on a simple, non-depleting process that responds quickly to changing O2 levels. The heart of our DF-500 range of oxygen sensors, it delivers the low-level detection that is essential for UHP gas applications.

Our Coulometric technology enables the measurement of O2 at percent or parts-per-million (ppm) levels. It is non-depleting, so there is no requirement for periodic cell replacement and it avoids the false low readings associated with standard electrochemical sensors.

It operates through a simple Coulometric process where O2 from the sample gas is reduced to hydroxyl ions at the sensor cathode.

The resulting current flow is proportional to the O2 content in the gas, and the process signal can be displayed in ppm or parts-per-billion (ppb) units of O2.

Coulometric sensors respond very quickly to changing O2 concentrations. For instance, a 0-1,000ppm range sensor can be exposed to air and in less than a minute will measure <10ppm on pure nitrogen. This is highly beneficial for users who have upset-prone applications.

Additionally, the performance of the sensor is unaffected by reasonable changes in flow rate.

Because the non-depleting sensor is not consumed when exposed to O2, it has a long lifespan and does not require a purge gas to protect it when not in use.

Related and alternative technologies

Coulometric sensing works alongside Laser Moisture technology in our DF-760E and DF-760E ULTRA analyzers, for a highly sensitive dual measurement of oxygen and moisture at ppm levels. Coulometric sensors should avoid sample streams that contain acidic gases. For applications involving these gases, a Paramagnetic or TDL sensor is recommended instead.

Key applications

Semiconductors

Solder reflow ovens

Reactor process control

Key benefits

Industry-leading lower detection limits

Fast response and rapid recovery

Non-depleting sensor with a long lifespan

Ideal for

Sensitive, parts-per-million measurements of O2, for example in impurity monitoring for UHP semiconductor gases

Explore the Coulometric analyzers we have for your process

Learn more about all our gas analyzer solutions that use this sensor technology.

Search Servomex Coulometric analyzers

Refine by search term

DF-550E NanoTrace

SERVOPRO Safe Area

An ultra-trace Coulometric oxygen analyzer, the DF-550E is optimized for quality measurements in ultra-high-purity electronic gases.

DF-550E an ultra-trace Coulometric oxygen analyzer.
  • An ultra-trace Coulometric oxygen analyser
  • For quality measurements in electronic gases
  • 200 parts-per-trillion Lower Detection Limit
  • Suitable for use with multiple background gases
  • Unaffected by sample and flow rate changes
  • Hand-carry portable option

DF-560E NanoTrace ULTRA

SERVOPRO Safe Area

A superior quality control solution for ultra-high-purity (UHP) electronic grade gases, the DF-560E Ultra delivers an industry-best detection of 45 parts per trillion for oxygen (O2).

SERVOPRO DF-560E ULTRA
  • Delivers industry-best oxygen measurements
  • For quality control in ultra-high-purity gases
  • Lower Detection Limit of 45 parts-per-trillion
  • High-stability Coulometric sensing technology
  • Optimised for ease of use and portability
  • Cost-effective setup and configuration

DF-760E

SERVOPRO Safe Area

Designed for quality control applications in UHP bulk gases, the compact DF-760E analyzer is a unique solution for the dual measurement of trace and ultra-trace moisture

  • For quality control in UHP bulk gases
  • Dual moisture and oxygen analysis
  • Trace and ultra-trace measurements
  • Non-depleting Coulometric O2 sensor
  • Robust TDL moisture sensing
  • Exceptional Lower Detection Limits

DF-760E ULTRA

SERVOPRO Safe Area

Designed for industry-leading quality control measurements in UHP bulk gases, the compact DF-760E ULTRA is a unique dual-analysis solution for trace and ultra-trace moisture and oxygen.

  • Dual moisture/oxygen analyser for UHP gases
  • Ideal for quality checking and leak detection
  • Lower Detection Limit of 55ppt moisture
  • Oxygen Lower Detection Limit of 45ppt
  • Combines Coulometric and TDL sensing
  • Broad detection ranges

MonoExact DF150E

SERVOPRO Safe Area

The MonoExact DF150E combines the reliability of Servomex’s tried and tested Coulometric oxygen sensor with a more user-friendly package.

  • Digital touchscreen and icon-driven interface
  • Tried and tested digital Coulometric oxygen sensor
  • Optimised for industrial gas applications
  • Measures oxygen across three ranges
  • Compact footprint for simple integration
  • No sensor zero calibration required
Learn more Enquire now

MonoExact DF310E

SERVOPRO Safe Area

Designed specifically for accurate measurements of oxygen in industrial gas (IG) applications.

  • Accurate measurements of oxygen and moisture
  • Designed for industrial gas applications
  • Tried and tested digital Coulometric oxygen sensor
  • Non-depleting Paramagnetic sensor option
  • Plug-and-play moisture sensor support
  • Analogue and digital communication options
Learn more Enquire now

Learn more about this technology and all the others we provide – download the magazine

Get a free copy of our special Expert Solutions magazine focusing on our complete range of sensing technologies. It’s available to download now.


Need more advice? Contact the gas analysis experts today

If you still need guidance to find the best solution for your process, we’re here to help. Our expert team combines applications knowledge with extensive experience and deep understanding of the sensing technologies available. We’ll help you find the solution that meets your unique needs.


© Copyright 2024 - Servomex is a Spectris company.
Click here to download your selected documents